碳纤维强度的统计特性及对复合材料线芯力学性能的影响

测试了国产T300级碳纤维的单丝和复丝拉伸强度,并用Weibull分布来描述碳纤维单丝平均拉伸强度。采用拉挤工艺制备出国产碳纤维复合线芯,测试了国产碳纤维复合线芯的弯曲强度和短梁剪切强度性能。结果表明:国产T300级碳纤维单丝拉伸强度性能达到东丽T300碳纤维水平,且分散性更小;复丝强度略低。国产T300级碳纤维集束性较差,在拉挤抽纱过程中,容易夹纱和起毛。在纤维体积含量基本相同情况下,国产T300级碳纤维复合线芯力学性能与东丽T700碳纤维复合线芯力学性能相差不大。     

UHMWPE纤维混凝土基本力学性能研究

研究了一种由超高分子量聚乙烯（UHMWPE）纤维增强的新型纤维混凝土基本力学性能。针对C70等级高强混凝土,设计了四种体积掺量纤维混凝土,通过立方体抗压、劈裂抗拉和四点弯曲抗折试验,分析了纤维掺量对混凝土力学性能的影响。结果表明：UHMWPE纤维对混凝土的抗压强度增强作用不明显,但较大提高了混凝土的抗拉强度和抗折强度,且对混凝土有很好的阻裂、增韧效果。在纤维体积掺量为0.3%~0.5%时,劈裂抗拉强度提高25%以上;掺量0.5%时,弯曲抗折强度提高率超过23%。     

Thomas Firth and Sons – Steelmakers to the Arms Industries. Part 2: Heavy Armaments

Firth’s were the first of the Sheffield steel makers to enter the field armaments. Their involvement with Colt has been outlined in an article in the journal of the Colt Collectors Association in America and their activities as steelmakers to the small-arms industries has been covered in a previous issue of this Journal. This article gives a brief overview of their involvement as manufacturers in the field of heavy armaments, being the first to make all-steel guns and their evolving role in the use of steel for ordnance, culminating in the displacement of wrought iron by the adoption of steel for ordnance manufacture by the Royal Gun Factory in the 1880s. It also highlights their development of stainless steel in this context.     

Damage analysis of POZD coated square reinforced concrete slab under contact blast

High efficiency, environmental protection and sustainability have become the main theme of the development of the protection engineering, requiring that the components not only meet the basic functions, but also have chemical properties such as acid and alkali corrosion resistance and aging resistance. Polyisocyanate-oxazodone (POZD) polymer has the above characteristics, it also has the advantages of strong toughness, high strength and high elongation. The concrete slab sprayed with POZD material has excellent anti-blast performance. In order to explore the damage characteristics of POZD sprayed concrete slabs under the action of contact explosion thoroughly, the contact explosion test of POZD concrete slabs with different charges were carried out. On the basis of experimental verification, numerical simulation were used to study the influence of the thickness of the POZD on the blast resistance of the concrete slab. According to the test and numerical simulation results that as the thickness of the coating increases, the anti-blast performance of the concrete slab gradually increases, and the TNT equivalent required for critical failure is larger. Based on the above analysis, empirical expressions on normalized crater diameter, the normalized spall diameter and normalized spall diameter are obtained.     

一种新型CVD铁涂层吸波纤维

利用Fe(CO)5受热分解,以CVD方法在SiC纤维表面涂覆单质铁的涂层。研究表明,涂层的引入对SiC纤维力学性能基本没有损伤;纤维依靠涂层导电,其电阻率显著降低;改变工艺条件,可以在较大范围内调节涂层纤维的介电常数,同时也引入了磁损耗机制;采用较低的沉积温度和较高的载气流速,可以提高介电常数和磁导率,同时有好的频散效应。     

聚碳硅烷表面张力的测定及其对纤维异形度的影响机理

采用改进的滴重法测定了先驱体聚碳硅烷(PCS)的表面张力,并探讨了表面张力对三叶形聚碳硅烷原丝异形度的影响机理。通过对纤维截面形貌的扫描电镜分析,发现表面张力对三叶形PCS纤维异形截面的形成有着较大的影响,它和粘滞阻力相互竞争的共同作用决定了三叶形PCS纤维异形度的大小。研究表明,先驱体PCS的表面张力与温度基本上呈线性关系,温度越高,PCS的表面张力就越小。     

两种新型试验用钢疲劳寿命差异的实验研究

选用两种新型试验用钢,分析测定了它们的化学成分、金相组织特征及夹杂物分布形态;通过高频疲劳测定试验比较了它们之间疲劳寿命差异。结果表明:对同种钢而言,缺口系数对疲劳寿命的影响非常大,缺口系数越大,疲劳寿命越小;不同钢之间的疲劳寿命的差异取决于钢中的化学成分及钢中夹杂物,合理地提高材料的合金元素,有效地改善材料的化学成分的配比及适当的热处理工艺可以明显提高材料的强度极限;纯净的钢质量及合理的高强度是提高钢的疲劳寿命的最合理、有效的手段。     

关于发展战术防空激光武器的思考

在分析国内外战术激光武器发展现状和未来趋势的基础上,结合我国现有的技术基础,从战术防空应用需求出发,确定了战术防空激光武器的发展思路,通过对武器系统技术路线的分析和比较,提出了我国战术防空激光武器的发展设想,并对武器系统需要解决的关键技术问题进行了论述.     

高速微粒轰击45钢表面纳米化过程中铁素体相晶粒细化过程分析

利用高速微粒轰击技术在45钢表面制备了纳米晶,利用透射电镜（TEM）和X射线衍射（XRD）等分析技术对距表面不同深度的微观结构进行分析,研究铁素体相晶粒细化过程。结果显示：随着距表面距离的减小结构尺寸逐渐减小,在最表面形成了纳米晶层,平均晶粒尺寸约为15 nm。通过不同尺寸位错胞的逐步形成,以及位错墙不断向晶界演化,晶粒被细化为细小的纳米晶。     

Gas metal arc welding of high nitrogen stainless steel with Ar-N2-O2 ternary shielding gas

High nitrogen stainless steel with nitrogen content of 0.75％was welded by gas metal arc welding with Ar—N2-O2 ternary shielding gas. The effect of the ternary shielding gas on the retention and improvement of nitrogen content in the weld was identified. Surfacing test was conducted first to compare the ability of O2 and CO2 in prompting nitrogen dissolution. The nitrogen content of the surfacing metal with O2 is slightly higher than CO2. And then Ar—N2-O2 shielding gas was applied to weld high nitrogen stainless steel. After using N2-containing shielding gas, the nitrogen content of the weld was improved by 0.1 wt％. As N2 continued to increase, the increment of nitrogen content was not obvious, but the ferrite decreased from the top to the bottom. When the proportion of N2 reached 20％, a full austenitic weld was obtained and the tensile strength was improved by 8.7％. Combined with the results of surfacing test and welding test, it is concluded that the main effect of N2 is to inhibit the escape of nitrogen and suppress the ni-trogen diffusion from bottom to the top in the molten pool.